Updated November 2026

Cleaning marble kitchen countertops well comes down to three things: wipe up spills quickly, use a pH-neutral cleaner for routine care, and treat stains with a poultice rather than harsh chemicals. Follow this routine and your marble will keep its polish, and you will avoid the etching and dull spots that come from acidic cleaners. Marble is a porous natural stone, so the method matters as much as the product.

Start With a Daily Cleaning Routine

Marble reacts badly to acid. Lemon juice, vinegar, tomato sauce and many all-purpose sprays can etch the surface within minutes, leaving a dull mark that looks like a water ring but will not wipe away. For everyday care, use warm water with a few drops of a pH-neutral stone cleaner, or a mild dish soap.

Shopping for one? See our guide: 6 Best Carrara Marbles for Kitchen Countertops Options Compared (2026).

Work in small sections. Dampen a soft microfiber cloth, wipe the surface, then follow with a second cloth that is clean and dry. Leftover moisture can leave streaks and mineral spots, especially on honed finishes.

Remove Spills and Stains Correctly

The faster you act, the better your odds. Blot liquids rather than rubbing them, because rubbing can push pigment deeper into the stone. For oil-based stains such as cooking grease or cosmetics, a degreasing stone cleaner works well. Organic stains like coffee, wine and fruit often need a poultice.

How to Make and Apply a Poultice

  1. Mix a paste of a non-metallic absorbent powder, such as baking soda or diatomaceous earth, with a small amount of hydrogen peroxide (3%) until it has the texture of wet sand.
  2. Spread the paste over the stain in a layer about 1/4 inch thick, extending slightly past the edges.
  3. Cover with plastic wrap and tape the edges to slow evaporation.
  4. Leave it for 24 to 48 hours, then remove the plastic and let the paste dry fully.
  5. Scrape off the dried residue with a plastic putty knife, rinse with water and dry the area.

Repeat if the stain remains. Stubborn metal stains, such as those from a cast iron pan or a rusty can, may need a poultice formulated for stone, so check with a stone care specialist before trying harsher options.

Protect and Maintain the Finish

Sealing is the other half of the job. Most manufacturers recommend resealing marble every six to twelve months, depending on traffic and finish. Test the seal by placing a few drops of water on the surface. If the water soaks in after about 15 minutes, the stone needs resealing. Use a penetrating sealer made for natural stone and follow the label on drying time.

Keep trivets and cutting boards on the counter. Marble scratches more easily than granite, and a knife can leave marks that polishing will not fully remove. Dust and crumbs should be swept or wiped daily to prevent grit from scratching the surface during routine cleaning.

A pH-neutral stone cleaner is the single most useful product for regular care, since it lifts grime without etching. Microfiber cloths help you dry the surface without streaks. A plastic putty knife lets you scrape dried poultice without scratching the stone.

  • pH-neutral stone cleaner for daily cleaning without acid damage. View on Amazon
  • Microfiber cleaning cloths that wipe up residue and leave a streak-free finish. View on Amazon
  • Penetrating marble sealer to reduce staining between professional refinishing. View on Amazon

Common Mistakes to Avoid

  • Using vinegar, lemon or bleach-based cleaners, which etch the surface.
  • Letting spills sit, especially wine, coffee and oil.
  • Scrubbing with abrasive pads, which dull the polish.
  • Skipping the sealer test and assuming the stone is still protected.
  • Leaving water rings by failing to dry the surface after cleaning.

Cleaning Marble Countertops FAQ

Can I use vinegar to clean marble countertops?

No. Vinegar is acidic and will etch marble, leaving dull spots that are hard to remove. Use a pH-neutral stone cleaner or warm water with a small amount of mild dish soap instead.

How do I remove an oil stain from marble?

Blot the spill, then apply a degreasing stone cleaner. For stains that remain, make a poultice with an absorbent powder and let it sit for 24 to 48 hours before scraping it off.

How often should I seal marble countertops?

Most manufacturers suggest every six to twelve months. Test the seal with a few drops of water; if it soaks in within about 15 minutes, it is time to reseal. A stone care professional can advise on your specific slab.

Conclusion

Clean marble with a pH-neutral product, blot spills immediately and use a poultice for stubborn stains. Reseal on a regular schedule and keep acidic cleaners out of the kitchen. With these habits, your marble countertops will stay polished for years.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our kitchen design & remodeling guides, checking product details against manufacturer specifications and owner feedback.