Updated November 2026

Shopping for a kitchen backsplash at Menards is easier when you know what to measure, which materials suit a working kitchen, and what to check before you load a cart. This guide walks through those decisions in order so you leave with the right quantities and the right setup. Work from the wall you plan to cover, not from a photo.

Measure the Wall Before You Shop

Start with the actual space behind the range, sink and counters. Most homeowners cover the area between the base cabinet tops and the bottoms of the wall cabinets, usually 18 to 20 inches high, though some run it up to the ceiling behind a range hood. Measure each wall’s length at the top and bottom, since walls are rarely perfectly square.

Shopping for one? See our guide: 5 Best Backsplash Tiles for Kitchen Walls in 2026.

Subtract openings for outlets, windows and the range, then add about 10 percent for cuts and breakage. Tile sold by the square foot is usually priced per box, so check the coverage printed on the carton and round up to whole boxes.

Choose a Material That Fits Your Kitchen

Menards carries several common backsplash options, and the right one depends on how the kitchen gets used. Ceramic and porcelain tile are the most common choices because they are durable, water resistant and available in many sizes. Glass tile reflects light and suits small kitchens, but it shows grout lines and fingerprints more readily. Peel-and-stick panels and vinyl sheets are lighter and quicker to install, though they suit low-heat areas better than spots right beside a range.

Grout color, tile size and layout matter as much as the material. Large-format tiles need fewer grout lines and look cleaner, while small mosaics hide uneven walls more easily. Check each product’s installation and cleaning guidance on the packaging or the manufacturer’s site before you commit.

Quick comparison

Option Strengths Watch for
Ceramic or porcelain tile Durable, easy to clean, wide style range Requires grout and setting materials
Glass tile Reflective, bright, good for small spaces Shows grout lines and smudges
Peel-and-stick panels Quick to apply, few tools needed Adhesion depends on a clean, smooth wall
Vinyl sheet or panel Wipes clean, lightweight Heat exposure near ranges can cause damage

Plan the Layout and Installation Steps

Lay out tile on the wall before you mix any adhesive. Dry-fit a row across the main run and check where cuts will fall at corners, outlets and the range. Avoid tiny slivers at the ends of a run by shifting the starting line so both ends get a cut of reasonable size.

  1. Clean the wall, remove outlet covers and shut off power at the breaker.
  2. Mark a level starting line, usually along the bottom of the wall cabinets or on a ledger strip.
  3. Dry-fit a row and adjust the layout so cuts are balanced.
  4. Apply adhesive or sheet backing according to the product’s directions.
  5. Set tiles or panels, check level as you go, and allow proper cure time.
  6. Grout (for tile), seal where the manufacturer recommends, and reinstall outlet covers.

For tile work, the adhesive you choose matters as much as the tile. Our guide to Tile Adhesive for Kitchen Backsplash: Choosing and Applying the Right One covers the main types. If you are new to tile, Tiling a Kitchen Backsplash: A Step-by-Step Guide for Beginners walks through the full process, and Putting Up Kitchen Backsplash: A Step-by-Step Guide for Beginners covers the setup steps in more detail.

Tools and Supplies Checklist

  • Tape measure, level and pencil
  • Notched trowel matched to tile size
  • Tile spacers and a cutting tool or wet saw
  • Adhesive or sheet backing, grout and a grout float
  • Sponge, bucket, painter’s tape and drop cloth

Common Mistakes and Tips

  • Buying before measuring. Confirm square footage and add waste allowance first.
  • Skipping the dry fit. Uneven cuts at corners are easy to avoid on paper.
  • Installing peel-and-stick panels on a greasy or textured wall. Clean and smooth the surface first.
  • Using vinyl or paper-based products directly behind a range without checking heat ratings.
  • Ignoring the design. Look at Pictures of Backsplash in Kitchen: How to Pick the Right Look From Photos to narrow your style before you buy.

A notched trowel sized to your tile helps you spread an even bed of adhesive. View on Amazon

Tile spacers keep grout lines consistent across the whole wall. View on Amazon

A rubber grout float pushes grout into joints without scratching glazed tile. View on Amazon

FAQ

Can I install a backsplash myself?

Many homeowners handle peel-and-stick panels and simple tile layouts without help. If your wall has electrical work, water damage or uneven framing, consult a licensed professional before starting.

How much extra material should I buy?

Plan on roughly 10 percent extra for cuts, breakage and future repairs. Buy from the same production lot where possible so color matches later.

Is a backsplash behind the stove safe with any material?

No. Check each product’s heat rating and keep combustible materials away from direct flame or hot burners. Confirm local code requirements or consult a professional if you are unsure.

Conclusion

A good backsplash starts with accurate measurements and a material that suits how you cook. Lay out the design before buying, follow the product’s installation directions, and keep a little extra on hand for repairs. With those steps done, your kitchen backsplash at Menards will look planned rather than rushed.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our kitchen design & remodeling guides, checking product details against manufacturer specifications and owner feedback.