By Lauren HollandUpdated November 2026
If you want the warmth and texture of brick for kitchen backsplash use but don’t want the weight, mess or structural work of real masonry, the realistic choices are thin brick veneers, faux brick panels and textured peel-and-stick sheets. This guide compares six products across the criteria that matter most in a kitchen: how the surface handles grease and splashes, how easily it goes on, how well the profile reads as brick from a normal viewing distance, and how much it asks of the wall underneath. Specifications below come from manufacturer listing details and common owner feedback patterns.
Our top picks at a glance
- 1
TOP CHOICEBest overallCommomy 3D Faux Brick Wall Panels (10pcs)View on Amazon - 2
TOP CHOICEBest for lightweight DIY installsThin UltraLight PVC Brick Wall CoveringView on Amazon - 3
TOP CHOICEBest for a classic red brick lookRed Thin Wall Brick Veneers (20 pcs)View on Amazon - 4
Best for a light, bright kitchenWhite Thin Brick Veneers (40 pcs)View on Amazon - 5
Best for renters and quick updatesGrey and White Vintage Brick Peel and Stick WallpaperView on Amazon - 6
Best budget pick for small areasRed Brick 3D Wall Panels, Waterproof Peel and StickView on Amazon
Our Top Picks
Before the list, a note on how these were selected. Each product was evaluated against four criteria: material and surface suitability for a splash zone, installation method, realism of the brick profile, and owner feedback patterns on adhesion and cleaning. Because kitchens are wet, hot and greasy, we gave extra weight to products whose listings specify waterproof or PVC construction. Thin veneers that need mortar or grout are a different category, and we note where that matters.
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| Commomy 3D Faux Brick Wall Panels (10pcs) | Overall DIY backsplash | Ultra-thin PVC panels, peel and stick |
| Commomy Thin UltraLight PVC Brick Wall Covering | Lightweight installs on drywall | UltraLight PVC construction |
| Red Thin Wall Brick Veneers (20 pcs) | Classic red brick character | Real-looking red brick profile, 3.5 sq. ft. |
| White Thin Brick Veneers (40 pcs) | Light, airy kitchens | White finish, 7 sq. ft. coverage |
| Grey and White Vintage Brick Peel and Stick Wallpaper | Renters and temporary updates | Removable contact paper, 17.3″ x 78.8″ roll |
| Red Brick 3D Wall Panels, Waterproof | Small accent areas | Waterproof, 11.81″ x 11.81″ tiles |
Commomy 3D Faux Brick Wall Panels (10pcs)
Peel and Stick Brick Wall Covering for Quick DIY Interior Wall Decor,Not Real Brick (12.92 sq.ft) Commomy 3D Faux Brick Wall Panels – Ultra Thin PVC 10pcs 15.74" x 11.8"
Best for: Overall DIY backsplash with a convincing 3D brick profile
This suits homeowners who want the most brick-like depth from a peel-and-stick product and are comfortable cutting panels to fit around outlets and under-cabinet edges. The listing describes an ultra-thin PVC build, which is the material type most commonly recommended for splash-prone surfaces.
Key specs
- Panel size: 15.74″ x 11.8″ (per listing)
- Quantity: 10 panels, about 12.92 sq. ft. coverage (per listing)
- Material: ultra-thin PVC
- Adhesive: peel and stick
Pros
- Large panels cover wall area quickly
- Dimensional texture reads as real brick at normal viewing distance
- PVC construction suits a splash zone better than paper-based products
Cons
- Adhesion depends heavily on a clean, smooth wall surface
- Cutting around outlets takes patience
Bottom line: A strong first choice for a DIY backsplash where the goal is a three-dimensional brick look and you can prep the wall properly.
Thin UltraLight PVC Brick Wall Covering
Thin UrltraLight PVC Peel and Stick Brick Wall Covering for Quick DIY Interior Wall Decor,Not Real Brick (12.92 sq.ft) Commomy 3D Faux Brick Wall Panels – 10pcs 15.74" x 11.8"
Best for: Lightweight installs on drywall and older walls
The “UltraLight” designation points to a thinner, lighter panel, which is useful if you are working on drywall that you would rather not stress or if you are installing above a counter in a space with limited wall depth. It is closely related to the first product, so the decision often comes down to which thickness and weight you prefer.
Key specs
- Panel size: 15.74″ x 11.8″ (per listing)
- Quantity: 10 panels, about 12.92 sq. ft. (per listing)
- Material: thin PVC, UltraLight construction
Pros
- Lighter weight eases handling on vertical walls
- Same panel footprint as the standard Commomy version for easy comparison
- Good option where wall depth is limited
Cons
- Thinner profile shows less shadow depth than heavier panels
- Edges may need extra adhesive attention on high-moisture walls
Bottom line: Choose this over the standard panel if weight and wall clearance are your main concerns.
Red Thin Wall Brick Veneers (20 pcs)
20 Pcs Red Thin Wall Brick Veneers, 2.4" x 7.9" for Kitchen Backsplash, Fireplace, Living Room, Interior and Exterior Wall Decoration (3.5 sq.ft)
Best for: A classic red brick look that matches traditional kitchens
These thin brick veneers are the closest match to the look many people picture when they search for brick for kitchen backsplash. They are sold as interior and exterior wall decoration, which tells you they are built to hold a brick profile. Veneers of this type are usually set in a bonding material and grouted, so plan for a more involved installation than peel-and-stick.
Key specs
- Brick size: 2.4″ x 7.9″ (per listing)
- Quantity: 20 pieces, about 3.5 sq. ft. (per listing)
- Color: red
Pros
- Authentic red brick color and proportion
- Suitable for both interior and exterior applications per listing
- Fits traditional and farmhouse-style kitchens well
Cons
- Coverage per box is modest for a full backsplash, so calculate quantities carefully
- Grout lines and bonding add time and cleanup
Bottom line: The right pick for a homeowner who wants genuine red brick character and is willing to do a set-and-grout installation.
White Thin Brick Veneers (40 pcs)
40 Pcs White Thin Brick Veneers, 2.4" x 7.9" Wall Brick, 3D Faux Brick for Kitchen Backsplash, Fireplace, Living Room, Interior and exterior wall decoration (7 sq.ft) (White)
Best for: Light, bright kitchens and white-on-white designs
White brick is widely used in modern and coastal kitchens because it softens the look of a masonry texture without adding visual heaviness. This 40-piece set gives more coverage per box than the red veneer option, which makes it easier to plan a standard backsplash run.
Key specs
- Brick size: 2.4″ x 7.9″ (per listing)
- Quantity: 40 pieces, about 7 sq. ft. (per listing)
- Color: white
Pros
- Higher piece count gives more coverage for the money spent on materials
- White finish blends with white or light cabinetry
- Easy to vary the look with different grout colors
Cons
- White shows grout staining and grease more readily, so plan regular cleaning
- Requires a flat, prepared substrate for a clean finish
Bottom line: Best for light kitchens where a textured, bright wall is the goal and a proper grouting process is part of the plan.
Grey and White Vintage Brick Peel and Stick Wallpaper
Self Adhesive Removable Wallpaper Grey and White Textured Vintage Contact Paper for Fireplace Kitchen Home Decoration Vinyl Brick Peel and Stick Wallpaper 17.3"x78.8" 3D Brick Wallpaper
Best for: Renters and temporary or low-commitment updates
This is a printed, self-adhesive brick-pattern film rather than a dimensional product. It creates the visual impression of brick at a fraction of the effort, and it can be removed when you move out. Be realistic about its limits: it is not a true three-dimensional surface, and it is best kept out of direct cooking spray and heavy steam.
Key specs
- Roll size: 17.3″ x 78.8″ (per listing)
- Material: self-adhesive removable vinyl/contact paper (per listing)
- Finish: grey and white textured brick pattern
Pros
- Removable adhesive suits rentals and frequent redesigners
- Covers a lot of wall quickly from a single roll
- Low skill requirement for installation
Cons
- Not a dimensional brick surface; the effect is flatter up close
- Adhesive performance near heat and steam is a common owner concern
Bottom line: A sensible pick for renters or anyone testing a brick look before committing, but not the most durable option behind a range.
Red Brick 3D Wall Panels, Waterproof Peel and Stick
11.81*11.81 Inch, Waterproof, Self-Adhesive Wall Tiles, for Accent Walls, Kitchen, Bathroom, Bedroom, Office Decor Red Brick 3D Wall Panels Peel and Stick, 10Pcs Brick Textured PVC Brick Panels
Best for: Small accent areas and a budget-conscious first project
These 11.81-inch square panels are a good fit for a small backsplash section, a pantry wall or a niche behind open shelving. The waterproof claim in the listing makes them more practical than many decorative sheets, though you should still avoid direct water jets and keep seams sealed.
Key specs
- Panel size: 11.81″ x 11.81″ (per listing)
- Quantity: 10 pieces (per listing)
- Material: textured PVC, described as waterproof
- Adhesive: peel and stick
Pros
- Square format is simple to lay out in a grid
- Waterproof listing suits kitchen splash areas better than paper products
- Easy entry point for a small accent project
Cons
- Square tiles can look less like real brick than running-bond veneers
- Coverage is limited, so larger backsplashes need many more packs
Bottom line: Ideal for a small, low-risk trial of a red brick look behind a range or sink.
Buying Guide
Decide between faux brick and real thin brick veneer
Faux brick panels (PVC or printed film) install with adhesive and typically take an afternoon. Thin brick veneers are real fired clay or cement-based pieces that need a bonding material and grout. Veneers look more authentic up close and handle heat better, but they demand more prep and skill. Faux brick is the practical choice for most DIYers.
Good picks for this: Commomy 3D Faux Brick Wall Panels, Red Thin Wall Brick Veneers
Check the material against a splash zone
A backsplash sees steam, grease and direct spray near the sink and range. PVC is widely used for interior decorative panels because it resists moisture better than paper. Look for “waterproof” or PVC in the specification, and avoid unsealed paper products directly behind a cooktop. Manufacturers generally advise keeping any decorative covering a safe distance from open flame or direct heat.
Good picks for this: Red Brick 3D Wall Panels, Waterproof Peel and Stick, Thin UltraLight PVC Brick Wall Covering
Measure coverage before you buy
Measure the wall in square feet: width times height for each run, then subtract openings. Add 10 percent for cuts and waste, more if you are using a running-bond pattern that requires half pieces at the ends. Compare the listed square footage with your number. The red veneer set covers about 3.5 sq. ft., so a standard 30-square-foot backsplash would require many more packs.
Good picks for this: White Thin Brick Veneers, Commomy 3D Faux Brick Wall Panels
Consider the wall underneath
Peel-and-stick products need a clean, dry, smooth surface, typically painted drywall with a sealed finish. Textured or greasy walls reduce adhesion. Veneers need a flat substrate and a bonding material rated for the surface. Remove old tile or wallpaper and check for flatness with a straightedge before you start.
Good picks for this: Thin UltraLight PVC Brick Wall Covering, White Thin Brick Veneers
Think about the look you want
Color and profile change the mood of a kitchen. Red brick reads traditional or farmhouse. White and grey read modern, coastal or Scandinavian. Dimensional panels with deep shadow lines give more visual weight than flat printed patterns. Match the brick tone to your cabinets and countertop, and bring a sample home before committing.
Good picks for this: Red Thin Wall Brick Veneers, Grey and White Vintage Brick Peel and Stick Wallpaper
Plan for cleaning and durability
Brick-textured surfaces trap grease in the recesses, so plan a soft brush and mild, non-abrasive cleaner. Light-colored grout and white brick show stains sooner, so consider a darker grout or a sealed grout line. Printed films may fade or lift over time with heat and cleaning, so expect to replace them sooner than dimensional products.
Good picks for this: Commomy 3D Faux Brick Wall Panels, Red Brick 3D Wall Panels, Waterproof Peel and Stick
Match the product to your renovation plans
If you may sell within a few years, a removable product protects your deposit and lets you restore the wall easily. If you plan to stay, a dimensional panel or veneer adds more lasting character. Installation cost also varies with method, so if you are weighing professional help, our kitchen backsplash installation guides cover what drives labor and planning.
Good picks for this: Grey and White Vintage Brick Peel and Stick Wallpaper, Red Thin Wall Brick Veneers
FAQ
Is brick for kitchen backsplash practical behind a stove?
It can be, with the right material and clearance. Choose a PVC or waterproof panel or a real veneer set in heat-tolerant bonding material, and keep decorative coverings a safe distance from open flame, following the manufacturer’s installation clearances. Printed films are better kept away from direct heat.
Can I install a brick backsplash myself?
Peel-and-stick faux brick is generally a manageable DIY project. Thin brick veneers require mortar or adhesive, grout and cutting tools, so a first-time installer should be prepared for a longer and messier job. If the wall has electrical outlets or moisture issues, consider consulting a licensed professional.
What is the difference between thin brick and real brick?
Thin brick veneer is a slice of real brick or brick-like material, typically a fraction of an inch thick, designed to be applied to a wall rather than structurally laid. Real masonry brick is heavy and requires a structural foundation. Thin veneers give the look without the weight.
How do I clean a textured brick backsplash?
Use a soft brush or microfiber cloth and a mild, non-abrasive cleaner. Avoid harsh scouring pads, which can damage PVC surfaces and printed finishes. For grout lines, a soft grout brush works well. Wipe grease promptly to prevent buildup in the texture.
Will peel-and-stick brick panels come off over time?
Adhesion depends on wall prep, surface type and exposure to heat and moisture. Owners commonly report good results when the wall is clean, dry and smooth, and problems when edges are near the sink or range. Re-pressing edges and using manufacturer-recommended adhesive can help.
How much brick do I need for a standard backsplash?
Measure the wall area in square feet, subtract openings, and add about 10 percent for waste. Compare that figure with the listed coverage on each product, since piece counts and square footage vary widely between sets.
Does a brick backsplash suit every kitchen style?
Brick works in many styles, but the color and profile matter. Red brick suits traditional and farmhouse kitchens, while white or grey brick fits modern, coastal and minimalist designs. Test a sample against your cabinets and countertops before committing.
Conclusion
For most DIY kitchens, the Commomy 3D Faux Brick Wall Panels offer the best balance of dimensional look and practical PVC construction. If weight or wall clearance is a concern, the UltraLight PVC covering is the close alternative. Homeowners who want genuine red brick character and are comfortable with grouting should look at the Red Thin Wall Brick Veneers, while the White Thin Brick Veneers suit light, modern kitchens. Renters will find the peel-and-stick vintage brick wallpaper the easiest route to a brick look, and the waterproof red 3D panels are a sensible, low-commitment trial for a small accent area. Before buying, measure your wall carefully, check the substrate, and confirm clearances near the range.
Sources
- Consumer safety guidance on home product use and installation hazards (cpsc.gov)
- Home renovation and building envelope basics relevant to wall assemblies (energy.gov)
- Kitchen design standards, clearances and planning guidance from the National Kitchen & Bath Association
Related reading
- Top 5 Metal Backsplash in Kitchen Options for Modern and Industrial Spaces
- Stone Backsplash for Kitchen: 7 Best Options for Durability and Style
- Stainless Steel Metal Kitchen Backsplash: 6 Best Picks Compared (2026)
About Lauren Holland
Lauren Holland is part of our editorial team and reviews and edits our kitchen design & remodeling guides, checking product details against manufacturer specifications and owner feedback.
