Updated November 2026
New kitchen countertops usually cost more than people expect, and the final number depends on four things: the material you choose, how many square feet you need, the edge profile and cutouts, and what labor and removal add to the job. This guide walks through each factor so you can measure your kitchen, get comparable quotes and build a realistic budget before you talk to a fabricator.
Step 1: Measure Your Counter Area Correctly
Fabricators price countertops by the square foot, so start with an accurate measurement. Multiply the length by the depth of each run, using 25 inches as the standard base cabinet depth plus the overhang, usually 1 to 1.5 inches at the front. Round up to the next half foot for each piece.
Shopping for one? See our guide: 7 Best How Much Does It Costs to Replace Kitchen Countertops (2026): Our Picks.
- Measure every straight run, including the return on an L-shaped layout.
- Add 1 to 1.5 inches of overhang to the depth for each front edge.
- Subtract only large openings such as a range cutout if it is wider than about 6 inches.
- Note backsplash height separately, since most quotes price it as a linear foot.
Step 2: Compare Material Costs by Category
Material is the biggest variable. Laminate is the lowest-cost category, while quartz and natural stone sit at the top, and the gap between them is often several times wider than most homeowners assume. Materials are typically quoted per square foot installed, which bundles fabrication and setting.
| Material | General Budget Level | Typical Upkeep |
|---|---|---|
| Laminate | Budget pick | Low, but heat and cuts damage it |
| Butcher block | Budget to mid-range | Regular oiling |
| Solid surface | Mid-range | Low, repairable scratches |
| Quartz | Mid-range to premium | Low, no sealing needed |
| Granite | Mid-range to premium | Periodic sealing |
| Marble | Premium option | Frequent sealing, etches easily |
For a deeper look at how each material compares, see Types of Kitchen Countertops: Materials, Costs and Care Compared. If you are weighing stone against engineered options, Kitchen Countertops Quartz Cost: What You'll Pay and What Drives It breaks down that one choice in detail.
Step 3: Account for Edges, Cutouts and Fabrication
Once you have a material, the fabricator’s add-ons shift the total. A square eased edge is the usual baseline, while bullnose, ogee or a thick built-up edge add linear-foot charges. Each sink, cooktop cutout and faucet hole is also billed separately, and a farmhouse apron-front sink often requires extra custom cutting. Ask for every charge to be itemized on the quote.
Step 4: Plan for Removal, Plumbing and Templating
Many quotes exclude the work around the counter itself. Old countertop removal, a template visit to measure the final cabinets, plumbing disconnects and reconnects, and backsplash installation may each be separate line items. Templating in particular is usually required before fabrication, so confirm whether it is included. If you plan to install a new backsplash at the same time, Kitchen Backsplash Install Cost: What Drives It and How to Plan covers how that line item is priced.
Common Mistakes
- Comparing quotes that list different materials, thicknesses or edge profiles.
- Forgetting that a 1.5-inch thick slab costs more than a 3/4-inch slab.
- Skipping the backsplash line item, then discovering it adds a second trip.
- Ignoring seam placement, which can add cost on long runs or large islands.
- Choosing a budget material without checking how it handles heat and cutting.
FAQ
How much does new kitchen countertops cost for an average kitchen?
Costs depend on the square footage, material and fabrication details, so a single figure can mislead. Get at least three itemized quotes based on your measured area to compare accurately.
Does the material or the labor drive the price more?
For most stone and engineered surfaces, material and fabrication drive the bulk of the cost, while laminate and butcher block usually involve less fabrication. Ask each fabricator to break out material from labor.
Should I budget extra beyond the countertop quote?
Yes. Removal, plumbing, templating and backsplash work are often separate charges, so set aside a contingency. A licensed plumber or contractor can confirm the scope before you finalize the budget.
Conclusion
Measure accurately, choose a material category that fits your use and upkeep tolerance, and make sure every quote lists the same edges, cutouts and extras. When you compare line by line, the true cost of new countertops becomes much easier to predict and control.
