Updated November 2026

If you want to know how much does it cost to change kitchen countertops, the honest answer is that the total depends on four things: material, square footage, the complexity of the removal, and what your installer needs to do before the new top goes on. This guide walks through how to measure your job, which variables move the number most, and how to build a budget that won’t fall apart after the first estimate.

Step 1: Measure the Linear and Square Footage

Countertop quotes are almost always based on square footage, but many fabricators bill by linear foot of edge length and then add charges for cutouts, backsplash and edge profile. Start by measuring each run of counter at its depth, which is usually 25 inches for base cabinets, including the overhang. Multiply length by depth for each section, then add the totals. Our notes on Width of Kitchen Countertops: Standard Depths and How to Measure cover the depth measurements in more detail.

Shopping for one? See our guide: 7 Best How Much Does It Costs to Replace Kitchen Countertops (2026): Our Picks. A related read: How Much Does a Kegerator Cost? Price Ranges and What Changes Them (2026).

Round up slightly. Most fabricators will work from their own template measurements, but a rough square footage gives you a baseline to compare quotes against.

Step 2: Choose a Material and Understand Its Cost Drivers

Material is the largest single lever on the total. Laminate sits at the low end, while quartz, granite and marble sit higher, and exotic stones and thick custom edges push the number further. The table below summarizes how the main materials compare on the factors that affect your budget.

Material Typical fabrication Main budget consideration
Laminate Pre-formed, often DIY-friendly Lowest material cost; shorter lifespan
Quartz Templated and fabricated by a shop Consistent pricing by slab grade
Granite Templated; slab selection matters Price varies widely by slab pattern and rarity
Marble Templated; often needs sealing Premium stone with added maintenance

For a closer look at how each option compares on durability and care, see Types of Kitchen Countertops: Materials, Costs and Care Compared.

Step 3: Account for Removal, Installation and Add-Ons

The countertop itself is only part of the bill. Removing old tops, disconnecting the sink and faucet, reinstalling plumbing, and adjusting backsplash and electrical outlets all add labor. Ask each quote to list these items separately so you can compare apples to apples.

  • Sink type: undermount sinks usually require more fabrication work than drop-in sinks.
  • Cutouts for cooktops and faucets, each billed separately.
  • Edge profile: a simple eased edge is typically the baseline; ornate profiles add cost.
  • Backsplash: some fabricators include a short backsplash, others charge per linear foot.
  • Demolition and disposal of the old top.

For a fuller walk-through of installation line items, read Kitchen Countertops Installation Cost: How to Budget Your Project Step by Step.

Step 4: Build a Budget With Contingency

Build your budget in three layers: material, fabrication and installation, and a contingency for surprises. Subfloor damage, outdated plumbing or an out-of-level cabinet run can all turn up after demolition. Many homeowners set aside an extra 10 to 15 percent of the project total for these issues. Getting at least three written quotes, each with the same measurements and specifications, makes the comparison far more reliable.

Keep in mind that a figure from a general online source is a starting point, not a quote. Local labor rates, slab availability and shop overhead all shift the final number, so verify with local fabricators.

Common Mistakes

  • Comparing quotes that list different materials, edge profiles or sink types.
  • Forgetting to include removal, disposal and plumbing reconnection.
  • Skipping the template appointment and relying on rough measurements.
  • Choosing a slab from a small sample without viewing the full piece.
  • Leaving out a contingency for hidden issues under the old counters.

A few tools help you verify measurements before the fabricator arrives. A long steel tape measure makes it easier to record run lengths accurately. A digital level helps you check whether your base cabinets are flat before templating. Painter’s tape is useful for marking sink and cooktop cutouts so you can confirm placement with the installer.

  • Steel tape measure: records long runs accurately in one pass. View on Amazon
  • Digital level: checks cabinet tops for flatness before templating. View on Amazon
  • Painter’s tape: marks cutout locations for a final placement check. View on Amazon

FAQ

Does the total cost include the backsplash?

It depends on the fabricator. Some include a short backsplash in the base quote, while others bill it separately by linear foot. Always confirm what is included in writing.

Is it cheaper to remove the old countertops myself?

Removing a laminate top with basic tools can be manageable, but stone tops are heavy and can crack. If you disconnect plumbing or gas lines, consult a licensed professional before proceeding.

How long does a countertop replacement take?

Most projects involve a template visit, fabrication time at the shop, then an install day. Timelines vary by material and shop schedule, so ask for an estimated calendar during the quote stage.

Conclusion

To answer how much does it cost to change kitchen countertops for your own kitchen, start with accurate measurements, choose a material, and request itemized quotes. Account for removal, plumbing and a contingency, and the final number will be far easier to trust. For broader planning, see Replacing Kitchen Countertops Cost: A Designer's Step-by-Step Guide (2026).

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our kitchen design & remodeling guides, checking product details against manufacturer specifications and owner feedback.