Updated November 2026
Lighting for under kitchen units puts light exactly where you chop, mix and read recipes, which is the part of the kitchen overhead fixtures usually miss. Done well, it gives you even, shadow-free task light across the counter and makes the whole room feel more finished. This guide covers the decisions that matter: fixture type, placement, spacing, color temperature and wiring.
Step 1: Decide Which Fixture Type Fits Your Cabinets
Most under-cabinet systems use one of three light sources: LED strips, linear puck lights or slim bar fixtures. LED strips give a continuous line of light and suit long, unbroken runs. Puck lights create pools of light and work well where cabinets are broken up by a range hood or open shelving. Bar fixtures sit in a shallow channel and are a good middle option if you want a tidy, hardwired look. For a side-by-side comparison, see Best Under-Cabinet Lighting for Kitchens: 6 Fixtures Compared.
Shopping for one? See our guide: 7 Best Kitchens Under Cabinet Organizer Picks Compared (2026).
Step 2: Plan the Light Layer Before You Buy
Under-cabinet light is task light. It should sit alongside ambient and accent lighting, not replace them. If you are still sorting out the overall scheme, Kitchen Lighting Plan: Task, Ambient and Accent Layers explains how the layers work together. Keep the task layer focused on work zones such as prep areas, the sink and the cooktop.
Step 3: Place and Space the Fixtures Correctly
Mount fixtures at the front edge of the upper cabinet bottoms, not toward the wall. This keeps the light from casting your shadow onto the counter as you work. Typical placement and spacing guidelines:
- Set fixtures 2 to 3 inches from the front edge of the cabinet.
- For LED strips, run continuous lengths and avoid gaps at corners.
- For puck lights, space them roughly 12 to 18 inches apart, then adjust after a test.
- Keep light sources at least 18 inches from the nearest counter edge where possible to limit glare.
For a deeper walk-through of spacing on the cabinet underside, see Lighting Underneath Kitchen Cabinets: 7 Steps to Even, Glare-Free Light.
Step 4: Choose Color Temperature and Brightness
Look for a color temperature between 3000K and 4000K. Warmer light around 2700K can feel cozy but may distort the color of food and finishes at the counter. Neutral white in the 3500K to 4000K range is the usual choice for prep work. Dimmable fixtures let you soften the light for evening use. Manufacturers typically specify lumen output per foot, so compare that number against the length of your run rather than picking by feel.
Step 5: Plan Switching and Wiring
Many kitchens tie under-cabinet lights to a wall switch, a plug-in controller or a smart-home system. Decide early whether you want the light on its own switch so you can use it without turning on the ceiling fixtures. If your run is long, check the manufacturer’s maximum run length and voltage drop guidance before you start. Hardwired installations should be handled by a licensed electrician, especially where new circuits or outlets are involved.
Step 6: Test Before Final Installation
Temporarily mount the fixtures or use adhesive clips and switch them on at the counter height where you work. Look for dark spots at the corners, glare from glossy finishes and light spilling into your eyes from the front. Adjust placement, then secure everything permanently.
Common mistakes
- Mounting fixtures too far back, which leaves the front of the counter in shadow.
- Mixing color temperatures across fixtures, which makes the counter look patchy.
- Ignoring gaps at corners and around the range hood.
- Skipping dimming, which leaves the light too harsh for evening use.
- Choosing fixtures with no clear voltage or run-length information.
Recommended gear
A basic set of tools makes the install much easier to manage.
- Aluminum mounting channel for LED strips helps diffuse light and gives a clean line along the cabinet underside. View on Amazon
- Plug-in LED dimmer controller lets you adjust brightness without rewiring. View on Amazon
FAQ
How far should under-cabinet lights be from the front edge of the counter?
Mount them near the front edge of the upper cabinets, usually 2 to 3 inches back, so the light falls on the work surface and not on your hands.
What color temperature works best for kitchen counters?
Neutral white between about 3500K and 4000K is common for prep areas because it shows food and finishes accurately.
Should I hire an electrician for under-cabinet lighting?
Plug-in and battery systems can be handled by most homeowners, but hardwired installs should be done by a licensed electrician. Check local code requirements before starting.
Conclusion
Good lighting for under kitchen units comes down to choosing the right fixture type, placing it at the cabinet front and matching the color temperature to your work. Plan the layer alongside your ceiling and accent lights, then test before you fix anything permanently. A little attention to spacing and wiring pays off every time you cook.
